Generators
Generators create finished parts from a few dimensions instead of drawing them by hand. They are all in the Toolbox (Tools → Toolbox …, Window → Toolbox or the tile button in the tools toolbar), sorted into groups and searchable.
| Page | Generators |
|---|---|
| Gears and racks | Gear, gear pair, rack |
| Pulleys and cams | Timing pulley, disc cam |
| Finger-jointed boxes | Finger Joint Box, Finger Joint Box with Dividers |
| Drawers, inserts and shelves | Drawer, divider insert, slot-together shelf |
| Layered and rib models | Layered model and rib model from an STL or OBJ file |
| Disc sphere | A sphere or lamp shade made of interlocking discs |
| Multi-layer work | Your own shapes stacked into a layered relief |
Joints between your own shapes, the lid hinge, living hinges and slots are tools rather than generators: see Joints, hinges and 3D view. Jigs are described under Print and Cut and jigs, dimensioned sketches under Snapping, guides and measuring.
Working with generators
Create and Add
Every generator dialog shows a live preview and checks the values as you type; problems appear in red or orange below the fields. Rarely needed settings are under Advanced.
- Create makes the part and closes the dialog.
- Add makes the part and keeps the dialog open, so you can set up the next one with other values. When you edit an existing part, Add creates a new one and leaves the edited part unchanged.
New parts go to the first free spot on the page, starting at the bottom left, 2 mm apart and 3 mm from the edge. Every object on the page is avoided, and an assembly (such as a box) keeps its layout. When the page is full, the part goes onto a new page. A part larger than the work area asks first: Create anyway in the centre, go back, or cancel. Each Create or Add is one undo step.
Editing a part later
Generators create parametric parts: they keep their parameters in the project. Double-click a part to reopen its dialog. The outline is recalculated, and position and rotation stay. For an assembly such as a box, a double-click on any panel edits the whole box; parts that are no longer needed disappear and new ones (such as a lid) are added.
Some changes would break the parameters: scaling, node editing, or a Boolean operation without "Keep originals". KizamuBeam then asks whether to convert the part to ordinary paths or to edit its parameters instead. Convert to Path does the conversion on purpose.
Formulas and parameters
Every numeric field accepts a project parameter or a formula, for example {Thickness} or {Width} - 2 * {Thickness}. Choice and yes/no fields get a parameter with the ƒ button. That way a box in a template follows the values filled in, and changing the material thickness in one place updates every part.
Kerf and clearance
Most generators have a Kerf field: the width of the laser cut. Outlines are offset outward by half of it and holes and slots get smaller, so parts come out at their nominal size. A kerf offset on the layer is applied on top, so set the kerf in one place only.
Slot-together parts also have a Fit clearance: how much play each joint gets (negative values give a press fit). Once the material of the layer is calibrated, new parts take thickness, kerf and clearance from the calibration, and existing parts offer a button to apply it.
Checking the result
The 3D view shows assemblies put together and marks collisions in red. The design check tests the fit of every joint and whether the parts can be assembled in some order.