Finger-jointed boxes
Find both box generators in Toolbox → Boxes and Furniture. For a lid that opens on a pin, add a lid hinge afterwards.
Finger Joint Box
| Field | Meaning |
|---|---|
| Dimensions | Outside dimensions or Inside dimensions: whether width, depth and height are measured outside or inside the walls. |
| Width, Depth, Height | Size of the box in mm. |
| Material thickness | Thickness of the board. Measure it; boards are rarely exactly as thick as sold. |
| Up | Open, or Closed (lid with fingers). |
| Finger width | Minimum finger width. Every edge gets an odd number of equally wide fingers. |
| Fit clearance | Every finger gets this much narrower; negative = press fit. |
| Kerf | Width of the laser cut; outlines are offset outward by half of it. |
The front and back walls own the corners. The parts are separate objects in a compact arrangement: identical parts stay together. A double-click on any part edits the whole box, on every page. Parts still in their generated layout move apart when they grow; parts you arranged yourself stay where they are.
Engraving on a panel
Put text or images on a panel and group them with it, or simply place them on top: in the 3D view, engravings show on the panel they lie on. The labelled box template (File → New from template …) is a ready example with a label on the front.
Getting a good fit
- Measure the material thickness with a caliper at several spots and enter the average.
- Start with a fit clearance of 0 and the kerf of your laser (0.1 to 0.2 mm for a diode laser on plywood).
- Cut the box. If it is too tight, increase the clearance in steps of 0.05 mm; if it is loose, decrease it.
The fit calibration finds these values for a material in one test, and new boxes then take them automatically.
Finger Joint Box with Dividers
An open or closed box with dividers that cross each other. This generator is experimental: check the parts in the 3D view and on an offcut before cutting the real material.
| Field | Meaning |
|---|---|
| Width, Depth, Height, Material thickness, Up | As for the box. |
| Compartments across width / Compartments across depth | Number of compartments in each direction. |
| Width distribution / Depth distribution | Clear compartment sizes as ratios or in mm, separated by colons. 1:2:1 makes the middle compartment twice as wide; 36mm:1 makes the first one 36 mm and the second takes the rest. + - * / and parentheses work too. Empty = equal compartments. |
| Divider drop below box top | How much lower the dividers are than the walls. |
| Kerf | Width of the laser cut. |
Finger width and Fit clearance are under Advanced. Pieces and their holes share one layer.